- 內阻測試儀
- 示波器電流探頭
- 電能質量分析儀
- 耦合板
- OTDR光時域分析儀
- 屏蔽箱
- 放大光模塊
- 光波萬用表
- 光源
- 光波長計
- 光示波器
- 光功率計
- 電池測試儀
- 光譜分析儀
- 熔接機
- 網線認證測試儀
- 安規測試儀
- 動態信號分析儀
- 晶體管測試儀
- 校準儀
- 藍牙測試儀
- 示波器
- 電源
- 信號發生器
- 頻譜分析儀
- 綜合測試儀
- 網絡分析儀
- 天饋線分析儀
- 數字示波器
- 數字萬用表
The HP 8152A Optical Average Power Meter and its optical heads provide the accuracy and versatility for absolute and relative power measurements in a fiber optic test environment. Applications range from output power measurement of active optical components, to ratio measurement of power splicers
Individually calibrated optical heads ensure highly precise measurement results over the entire wavelength range from 850 to 1700 nm. After entering the operating wavelength, the appropriate sensitivity correction factor will automatically be taken into account to ensure the correct measurement value is displayed.
The combination of 2 independent optical inputs, the capability to perform ratio measurements, plus the new HP 81000BS Optical Power Splitter provides a fast, easy solution to determine the power ratio of an optical splitter or eliminating the instabilities of an optical source.
All functions can be set manually via front panel controls, or programmed via HP-IB for complete remote control. The HP 8152A is therefore an ideal tool for departments such as R&D, production and incoming evaluation.
Specifications
Wavelength Range | 850 to 1700 nm |
Sensor Element | Cooled Ge PIN Diode |
Sensor Diameter | 5 mm |
Maximum Power Density | 10 mW/mm |
Measurement Range | +3 to -80dBm |
Resolution | 4 1/2 digits, 0.01dB, 10 pW best case |
Traceable Calibration Accuracy | ±5% |